Browse all practice questions for the ITS Certiport Networking Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ITS Certiport Networking Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Ipv6 addresses are 64 bit in length.
  • IPv4 octets are 8-bit fields in IPv4 addresses.
  • The number of connections equals the total number of computers minus one. Which topology does this describe?
  • Which device connects Ethernet-based devices to the network in a wireless environment?
  • Fe80::2AA;FF:FE 28: 9C 5A is a valid IPv6 address.
  • What is the role of a default gateway in an IP network?
  • Which service commonly uses TCP port 22?
  • What term refers to a system of interconnected networks?
  • In a typical home network using private IPv4 addressing, which device assignment best describes its role at Layer 3?
  • Which statement is correct about QoS capabilities?
  • It is standard practice to divide the binary bits of an IPv4 address into 8-bit fields named octets.
  • Which VPN type enables remote users to access a private network over the Internet?
  • Which topology has each node connected to exactly two other nodes?
  • Which DNS record types and their primary purposes (A, AAAA, CNAME, MX)?
  • Which description matches the UDP protocol?
  • Which statement best describes a typical use case for a DMZ in a modern network architecture?
  • Which VPN securely connects two portions of a private network or two private networks?
  • What is the purpose of traceroute (tracert) in network troubleshooting?
  • Which statement correctly describes major differences between IPv4 and IPv6?
  • Which protocol resolves IP addresses to MAC addresses?
  • What term describes the device that forwards frames based on MAC addresses and maintains a MAC address table?
  • Which statement about the use of QoS in a corporate network is most accurate?
  • Which IPv6 address type is used for local network operations?
  • A perimeter network is typically used to grant internal clients access to external resources.
  • The TCP/IP model has four layers, which correspond with the OSI model's seven layers.
  • The OSI seven-layer model includes Application, Presentation, and Session layers among its top three.
  • Wireless bridges always work in pairs.
  • When an iterative query cannot be resolved from local data, the query needs to be escalated to a root DNS server.
  • Fe80::F856:02AA is a valid link-local (APIPA) IPv6 address.
  • Which statement best describes a connection-oriented protocol with guaranteed service?
  • Which DNS record differentiates A, AAAA, CNAME, and MX records?
  • What is the role of a default gateway in routing packets to destinations outside the local subnet?
  • What is the role of an access point in an enterprise network versus a home network?
  • Dynamic Routing provides the ability to select the best route based on routing metrics.
  • Quality of Service (QoS) is used to prioritize network traffic.
  • Which of the following is not a typical function of a proxy server?
  • Which statement best contrasts TCP and UDP?
  • What is a DMZ in network security and when is it used?
  • Which statement best describes QoS?
  • Which capability is accurately attributed to QoS?
  • Which notation is used for IPv6 addresses?
  • A switch floods ports if it does not know where to send a packet.
  • Which of the following is true regarding QoS and bandwidth?
  • Which statement about wireless bridges is consistent with common network behavior?
  • Which OSI layer is responsible for end-to-end data transport and reliability?
  • In a network where every node is connected to every other node, this is known as?
  • Which device is a Layer 3 device?
  • What does a DNS AAAA record map?
  • A switch sends broadcast packets to the uplink port only.
  • Which topology features a central connectivity device to which all nodes connect?
  • Which feature of IPv6 helps devices configure themselves automatically on a network?
  • Which DNS record designates mail servers for a domain?
  • APIPA addresses provide what kind of connectivity?
  • Which topology has every computer connected to every other computer?
  • Which tool would you use to display the path packets take to a destination in Windows?
  • Which statement best describes a connectionless, best-effort protocol?
  • Which VPN allows a remote user to connect to a private network from anywhere on the Internet?
  • Which IP address range is commonly used for private LANs?
  • What is ARP and what problem does it solve?
  • Which protocol uses port 21?
  • 21DA:D3:0:2F:3B:2AA:FF:FE:28:9C 5A is a valid IPV6 unicast address.
  • Which ports are used by HTTP and HTTPS, and what is their security difference?
  • With a recursive DNS query, the DNS server will contact any other DNS servers it knows about to resolve the request.
  • Define QoS and give an example of its use.
  • What is SNMP used for in network management?
  • What is the primary role of a router compared to a switch?
  • Which range represents multicast addresses?
  • The TCP/IP application layer maps to OSI Application, Presentation, and Session layers.
  • Which of the following statements is true according to QoS basics?
  • The TCP/IP application layer corresponds with the top four layers of the OSI model.
  • IPv6 addresses can be compressed using :: to replace zeros.
  • IPv6 addresses are 128 bits long.
  • Which network type provides controlled access for specific business or educational purposes?
  • Which term describes the variation in packet delay in a network?
  • A DNS server makes an iterative query as it tries to find names outside of its local domain when it is not configured with a forwarder.
  • When a switch does not know the destination port for a frame, what action is typically taken?
  • What is the purpose of Spanning Tree Protocol (STP) in Ethernet networks?
  • In network management, QoS is used to do which of the following?
  • Which device provides wireless access to clients in a wired network?
  • FeC0::9C5A is a valid IPv6 address of which type?
  • Which group of protocols are considered Application Layer protocols?
  • Which of the following is a true property of QoS?
  • Which of the following statements about IPsec usage is true?
  • What is the purpose of a proxy server?
  • True or false: QoS allows you to control bandwidth.
  • In a 192.168.10.0/24 network, what is the broadcast address?
  • What does a DNS A record map?
  • What is NAT overload (PAT) and why is it beneficial for home networks?
  • In terms of traffic management, QoS primarily focuses on:
  • Which VPN type is typically used to connect two private networks at different sites securely?
  • Which NAT type maps multiple private addresses to a single public IP using port numbers?
  • What is the difference between a static and a dynamic routing protocol?
  • The TCP/IP transport and Internet layers corresponds with layers 3 and 4 of the OSI model.
  • Which statement about private IP addresses (RFC 1918) is accurate?
  • QoS is primarily used to what in a network?
  • In which topology is there a central connectivity device that all computers connect to?
  • Which statement best describes a broadcast address in an IPv4 subnet?
  • IPsec network traffic is always encrypted.
  • Is 0:0:0:0:0:0:0:1 the loopback address for IPv6?
  • When evaluating QoS, you should expect it to:
  • The tracert command determines packet loss between a source and a destination.
  • Which CIDR prefix corresponds to the subnet mask 255.255.255.0?
  • Which OSI layer is responsible for routing decisions and logical addressing?
  • What is the concept of a default route and how is it represented?
  • Layer 3 of the OSI model controls routing between network devices.
  • Which statement about QoS is true?
  • What is the difference between WPA2-PSK (AES) and WPA3-Personal security?
  • Which statement aligns with QoS capabilities?
  • Compare Cat5e and Cat6 ethernet cables in terms of shielding and maximum typical speeds.
  • Which term describes a network that allows access only to users within an organization?
  • Distinguish between a MAC address and an IP address and where each is used.
  • How does NAT overload (PAT) relate to inbound connections from the internet?
  • Which statement best describes the use of VLSM?
  • Name common fiber optic connector types and their typical use.
  • The tracert command can display a list of routers being used for all active connections.
  • A wireless bridge connects Ethernet-based devices to the network.
  • HTTP, TELNET, FTP, and SMTP protocols operate on Layer 7 of the OSI model.
  • What is the primary purpose of a perimeter network (DMZ) in a network design?
  • What is the function of a firewall in a network?
  • Which device forwards IP packets between networks?
  • A wireless bridge increases the wireless signal strength of the access point.
  • IPv6 addresses are divided into how many blocks, and what is the size of each block?
  • Which range is a private network address?
  • Which network description best describes a network that extends internal resources to external partners with controlled access?
  • In which topology is a signal typically forwarded by each node to the next node forming a loop?
  • Which protocol uses port 25?
  • A perimeter network typically contains servers that require Internet access, such as web or email servers.
  • The value of any IPv4 octet can be from 0 to 256.
  • What is the purpose of subnetting in IPv4 networks?
  • In which topology is each computer connected by a single cable to a central device?
  • Which statement best describes NAT and PAT?
  • Which protocol creates an unencrypted connection between two network devices?
  • An IPv4 octet value can be 256.
  • Which IPv6 address type is used for Internet traffic?
  • QoS is used to manage what aspect of traffic?
  • What is DHCP relay (IP helper) and why is it used?
  • QoS allows you to define the priority traffic on the network.
  • What is the IPv6 loopback address?
  • Which option correctly describes a function of QoS?
  • Which statement best describes IPv6 address space compared to IPv4?
  • Which protocol is used to map IP addresses to hardware addresses on a local network?
  • Outline a basic structured approach to network troubleshooting.
  • What does the 0.0.0.0/0 route represent in IP routing?
  • Which protocol operates at the TCP/IP Application layer and is used to transfer files?
  • What is channel planning in the 2.4 GHz wireless band and why is it important?
  • What does SLAAC stand for?
  • Which of the following statements about IPsec is true?
  • Fe80::F856:02AA is a valid IPv6 address used for which scope?
  • Layer 4 of the OSI model controls dialogue between computers.
  • Which IP range corresponds to the loopback address?
  • A LAN has no access to the perimeter network.
  • Dynamic Routing provides the ability to automatically remove routes from the routing table when other RIP neighbors delete them.
  • Dynamic Routing provides the ability to add networks automatically by learning them from other RIP routers.
  • In which topology does each workstation act as a repeater to forward signals?
  • An IPv4 address consists of 64 bits.
  • FeC0::9C5A is a valid Site-Local IPv6 address.
  • IPv6 addresses can begin with Fe80 prefix.
  • The tracert command displays router addresses that are traversed between a source and a destination.
  • Which security standard uses SAE authentication and stronger encryption for personal networks?
  • What is the main purpose of a VLAN in a LAN?
  • What is the primary function of the OSI model's Transport layer?
  • Name and describe the common NAT types used in small networks.
  • Which sequence lists the OSI layers in order from top to bottom?
  • Which device operates at Layer 2 to forward frames within a local area network using MAC addresses?
  • Which protocol uses port 443?
  • What happens when a client cannot obtain an IP address from DHCP and does not have APIPA?
  • Which description matches the TCP protocol?
  • Which DNS record type maps a hostname to an IPv6 address?
  • How does a hub differ from a switch in terms of data forwarding?
  • Describe the DHCP process sequence used to assign an IP address to a client.
  • Which statement about a hub's data forwarding behavior is correct?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy